The Specna Arms SA-E22 EDGE™ Kestrel™ ETU
Specna Arms presents the EDGE™ line with the Kestrel™
The trigger control system aids in the operation of the replica, and allows programming of functions easily with the trigger.
The Kestrel V2 Basic ETU by Eshooter is an advanced ETU system featuring ease of use, durability and functionality. The Kestrel V2 Basic is programmable with trigger pulls, works with both brush and brushless motors in High Speed and High Torque configurations and increases the reliability of the replica and protects internal parts in the event of overload due to motor damage or battery drain.
Functions of the Kestrel Basic system:
-Pre-cocking programmable in 5 stages with a piston position learning function.
(function requires a few single shots after connecting the battery for calibration)
-Active Break. The replica performs a full cycle with each shot, so that no unnecessary overloads are created in the GB due to performing part of the cycle.
-Locked Rotor Protection, function protects the inside of the replica in case of damage to the motor
-Battery Drain Protection. Protection against battery discharge. The motor vibrates, the blue LED illuminates five times to indicate battery drain
-Low/ High Voltage Protection. The module detects the number of battery cells and adjusts operation for different cell counts and voltages from 6V to 17V.
EDGE™ is a line of Specna Arms replicas that combines a range of solutions and technologies that are difficult to find in other replicas on the market. It is a line that focuses on both very good external workmanship, solutions that increase the versatility of the replica, prolong its life, make it easier to diagnose malfunctions, as well as susceptibility to power tuning. From the box you get a replica in which you do not have to make any modifications, but if you want – they will be fabulously easy.
Every part of the replica has been made and fitted with attention to detail, additionally, a coating Nano Coating has been used to finish the body to prevent scratches. The body features deep engraved markings Specna Arms and individual serial number confirmed by an additional hologram. Noteworthy details include QD pistol grip, providing quick and easy access to the motor without the need for tools, and bearing eyelet for mounting a tactical sling.
The replica is fitted with a front rail in the M-LOK mounting system. The barrel terminates in a standard exhaust device mounted on a 14mm CCW thread. On the back of the replica are placed folding sighting instruments.
The replica has a stock mounted precision internal barrel with a diameter of 6.03mm, which will ensure high accuracy and repeatability of shots fired. With the barrel cooperates rotating Hop-Up chamber new type, which allows for a very precise and stable adjustment of the ball recoil system.
The replica uses the quick-change spring system, ESA™. It allows quick and efficient adjustment of the replica’s power to the conditions expected on the field of play without the need for access to a workshop or a number of specialised tools – simply unscrew the stock guide to reveal access to exchange the spring without having to pull out, or disassemble the gearbox.
The advantages of the system ESA™ are difficult to overestimate. In light of the arrangements that exist within the environments themselves, the system guarantees the user considerable possibilities and a great deal of freedom. The ESA™ system allows minimal time to replace the mainspring and thus to adapt the replica’s discharge velocity to the area of play, so as to guarantee the ideal compromise between the effectiveness of the fire and the safety of oneself and other players. Also included in the box with the replica is a second M90 mainspring, which is perfect for indoor games.
The heart of the replica is the ORION Gearbox based on a reinforced frame and equipped with a mainspring release function. The replica straight out of the box comes with a range of high quality parts, making it high performance and ready for further tuning. The ORION Gearbox is ready to work with M140 springs. Inside, features such as:
– reinforced polymer piston with full steel jaw
– aluminium sealed nozzle
– aluminium double sealed cylinder head
– aluminium double sealed piston head with bearing
– bearing spring guide
– set of steel gears
– 8mm ball bearings
The replica box includes two S-MAG mid-cap magazines with a capacity of 125 rounds each. The S-MAG is an exclusive polymer magazine designed by Specna Arms. What draws attention is the distinctive texture composed of Specna Arms logos. The S-mag ensures trouble-free feeding of BBs, even at high ROF.
Package include:
2 x mid-cap S-MAG magazine
Deans adapter – small Tamyia
Instruction
Replica
M90 additional spring
Vertical Grip
Package exclude:
The set does not include the battery nor charger
Reviews
There are no reviews yet.