Cybergun/VFC SIG MCX Redline N7

Cybergun/VFC SIG MCX with installed Redline N7 system.

The Redline N7 V2 is a Patent Pending HPA drop in cylinder replacement.

The N7 is not just another cylinder replacement engine. It uses a single solenoid, and is designed to replace an AEGs compression cylinder, but that’s where the similarities end. The N7 is a truly unique design. Unlike other manufacturers HPA cylinder replacements, the N7 has a forward biased nozzle and fires from a true closed bolt.

 Due to its true closed bolt design, the N7 is much more consistent in seating the BB in the bucking from shot to shot when compared to typical open bolt designs. The result is more consistent shot to shot velocity, tighter groupings and greater accuracy at the range when compared to open bolt type engines.

 Another unique feature of the N7 is that it uses a fixed volume, mechanically sealed, dump chamber. Rather than relying on solenoid dwell to control the volume of air used to propel the BB, the N7 fills an internal chamber at the pressure set by the user’s external supply regulator. When fired, this air chamber is mechanically sealed off from the supply and the chambers contents released down the barrel to propel the BB. This feature contributes to the N7’s excellent shot to shot consistency, with no air wasted do to improper dwell settings.

 The N7 is also super simple to set up. Since there is no poppet dwell to tune you just set your supply regulators output pressure to match the Joules required and you are good to go. The proper amount of air needed for each shot regardless of BB weight, barrel length or any other factor is all that is released.

And while not completely eliminated, this design also results in the N7 having less “Joule Creep” when different BB weights are used when compared to other HPA engines. 

 The N7 will be available in 2 versions. A standard electro-pneumatic version, and the “N7 Milsim” fully mechanical-pneumatic version.

 The electro-pneumatic version uses a solenoid, a trigger board, battery and programmable FCU and operates like a standard electro-pneumatic HPA engine. It has select fire, user programmable Semi-Auto and Full Auto rates of fire, programmable Full Auto/Burst Mode and adjustable Nozzle Dwell.

 The N7 Milsim is the engine for the devote Milsim player. It is Semi-Auto only and uses a reliable all mechanical-pneumatic design. The FCU and battery are eliminated and the trigger board and solenoid are replaced with a pneumatic valve, hoses, and solenoid plug.

 The trigger feel is fantastic and high semi-auto rates of fire are easily achieved. And with no batteries or electronics to fail, playing in the rain/snow is no longer an issue or concern.

 Since the base N7 engine body is the same between models, conversion kits will be available that will allow you to convert an electro-pneumatic N7 to an N7 Milsim and vice versa.

*IMPORTANT: Installation of Redline N7 requires 4-5 working days. The replica will be shipped after the engine has been installed into the replica.